1 LED PEAK
Indicates overload. If the LED flickers or lights up, the input level is too high.
2 LINE VOL
Volume control for the LINE input. Turn this knob clockwise to increase the volume. Turn it counter-clockwise to
reduce it.
3 TRE
Treble control. Turn this knob clockwise to increase the high frequencies. Turn it counter-clockwise to reduce them.
4 BASS
Bass control. Turn this knob clockwise to increase the low frequencies. Turn it counter-clockwise to reduce them.
5 AUX VOL
Volume control for the AUX input. Turn this knob clockwise to increase the volume. Turn it counter-clockwise to
reduce it.
6 LED SIGNAL
Indicates an incoming input signal.
Connections and operating elements
active full-range speaker
14
To Next Page
Loading...
