The Cool Tool Uni-Print-3D User Manual

7
Starten der „machinekit-client“ Oberäche:
Doppelklick -> Start_machinekit-client.bat
Weitere Details im Manual des TCTControl.
Start „machinekit-client“ interface:
double click -> Start_machinekit-client.bat
More details at the TCTControl manual.
(1) Starten der Uni-Print-3D Konguration
(2) Drucker einschalten und
„MACHINE“ - TCTControl einschalten.
(1) Start Uni-Print-3D conguration
(2) Switch ON Uni-Print-3D and
„MACHINE“ - TCTControl
1
2

The Cool Tool Uni-Print-3D Specifications

General

Brand	The Cool Tool
Model	Uni-Print-3D
Category	3D Printers
Language	English