If you do not use the electric bike for more than 5 minutes, the display will turn off automatically.
Adjust the speed as necessary and with the + and - buttons.
It is recommended to start slowly and then increase according to road conditions
and traffic.
Indications on the e-Bike display:
Power switch
Adjusting the change/Adjusting the parameter +
Adjusting the change/Setting the parameter -
Displaying electric charge
LED floodlight: turn on the light
Error code
Total mileage
Partial mileage
Overall mileage
4. Use of your e-Bike
3. Folding and methods of use
FOLDING METHOD:
• Remove the lifting handle.
• Release the safety clip ring.
• Open the folding handle and fold the upper end down.
• Adjust the position.
The folding method of the frame is the same.
Add lubricating oil to the frame folding device often.