You can also remove the battery from the e-bike and recharge it.
You have to raise the saddle with the lever located below it, which will allow you to remove the
battery. First, you must unlock the battery with the ignition key. Once the charging is complete,
replace the battery by inserting it into the holder and then lock the battery with the ignition key
again.
Do not touch any of the poles of the battery case with your hands when the battery is removed.
In addition, the polishing poles must not come into contact with any metal or other conductive
material, as it could cause a short circuit.
If you have not been cycling for a long time, the battery should be charged at least once a
month. This will ensure a good battery life.
DO NOT USE when the level of the battery is low. Do not leave the battery empty for a long
time. The battery will continue to discharge itself causing damage.
Avoid any contact with liquids while charging. If the connector or socket is wet,
dry thoroughly before use.
If you experience extremely high temperatures during charging, or smell a peculiar odor, stop
charging and contact your local distributor or Customer Service Center.
To Next Page
Loading...
