— E3 —
Assembly
Not for use with other microphone stands. Only lift unit from bottom base. Use caution
when placing larger-sized devices in holder.
v
x
w
1
Insert and rotate clockwise to
tighten the Main unit onto the
Base.
2
Lift the rubber cover on the top of
the Main unit. Insert the Mic stand
into the Main unit and tighten it.
3
Insert and rotate to tighten the
Cradle with Mic holders on the Mic
stand.
4
Untighten the mic stand locker(s)
to adjust to a suitable height.
Retighten the locks to hold in
position.
All-in-one assembly
To Next Page
Loading...
