— E10 —
6
Connect microphone(s) and slide the
ON/OFF switch on the microphone to
the ON position.
7
Adjust the MIC VOLUME control
as desired. Increasing this control
will increase the volume of both
microphones.
8
SKIP: Advance or go back one track
by pressing the or buttons. You
can also skip ahead 10 files/ tracks
using the +10 button.
9
REPEAT: During playback, press
the PROG/REPEAT button once to
repeatedly play the selected song;
the Repeat indicator will blink rapidly.
Press the PROG/REPEAT button a
second time to repeatedly play the
selected folder; the Repeat indicator
will blink slowly. Press a third time to
repeatedly play the USB; the Repeat
indicator will light solid. Press it
again to cancel Repeat function; the
indicator will turn off.
10
PROGRAM: You can program up to
20 tracks for playback in any desired
order. While in the Stop mode, press
the PROG/REPEAT button; the
Prog. indicator will blink and ”01” will
appear on the display indicating the
first program is ready to program.
Select the first track using the /
buttons. Press the PROG/REPEAT
button again to confirm the entry.
Repeat to set up to 20 tracks into
memory. When done, press the
PLAY/PAUSE button to start
playback.
Playing Songs from the USB (Continued)
Operation
U
V
W
X
W
at
at
To Next Page
Loading...
