— 12 —
Operation
Playing Songs from the USB
1
Connect the unit as described
previously; it should be connected to
a TV (see page 5). Press the POWER
ON/OFF button to turn the unit on.
2
Insert a USB flash drive into the USB
slot on the unit so it faces upward.
3
Repeatedly press the FUNCTION
button to select the USB mode; “USb”
will appear when searching the drive
and then the total number of files will
appear.
Note: It is highly recommended to have it
connected to a TV for USB playback.
4
Press the
ENTER/
Play/Pause
button to start playback; if listening
to an MP3+G file, the image and
lyrics will appear on the TV screen (if
connected).
Notes:
• If connected to a TV you will see the
selected song and folders on the TV
screen. You can navigate them using
the Navigation buttons.
• If you recorded any audio files you can
also select them using the Navigation
buttons to select the REC folder on the
TV screen.
5
Adjust the volume to a comfortable
level using the MASTER VOLUME
control.
Note: If connected to a TV or other audio
source, adjust the volume of the TV using
its own volume control.
1
2
3
4
5
To Next Page
Loading...
