term glossary
To properly install, use and enjoy your Stair Barrier, you need
to know the staircase terms shown in the diagram.
Before installation of your Stair Barrier, measure the distance
between the wall and banister of your staircase and conrm
that you have purchased the correct Stair Barrier model.
before installation
wall to banister
stair width compatibility
6-24
months
small &
large
Regular
Height: 32”
Width: 36” –
43”
Wide
Height: 32”
Width: 43+”
– 52”
what’s in the box
1 Stair Barrier 1 Installation Kit*
*Parts Included:
1 rod, already installed | 2 brackets | 2 spac-
ers | 8 anchor bolts &
8 2” screws
Tools Needed:
Electric Drill | Level | Stud Finder | Pencil |
Hammer
Additional spacers can be purchased
through our website. Longer screws may be
required to accommodate the depth, if addi-
tional spacers are purchased.
installation instructions
1. Pull your Stair Barrier across stairs with the
rod in place. Slide one of the brackets onto
the bottom of the rod, at side to the wall and
ush to the bottom of the step, or the oor
if using at the top of the stairs. Mark the 4
bracket holes with a pencil. Roll TSB back
to the banister side for the time being. If you
have molding, install the 4 screws directly
through the bracket into the wall without TSB
inserted. See Fig. A. If you are drilling into
wood or studs, you will not need the anchors.
If you are attaching directly to drywall, use a
hammer to gently tap anchor bolts halfway
into the drywall at the 4 pencil marks. Use a
screwdriver to tighten until ush with the wall.
See Fig B.
2. Insert TSB with rod into the bottom bracket.
Take the 2nd bracket and slide onto the top
of the rod, at side against the wall. Use a
level to ensure the rod is as level as pos-
sible. Mark 4 holes with a pencil. Roll TSB
back to the banister side.
3. If you are attaching to drywall, use a hammer
to gently tap anchor bolts halfway into the
drywall at the 4 pencil marks. Use a screw-
driver to install the rest of the way (until ush
with the wall).
4. Once you have determined how many
spacers you need, slide the second bracket
with screws and spacers onto TSB with
rod. Line up screws to the pencil marks,
or anchor bolts and tighten into place.
See Fig. C.
The Stair Barrier is committed to providing parents a high quality, attractive and American-made solution for keeping children and
pets off staircases. Our team takes pride in delivering exceptional products and customer service. If you have any questions or
concerns about your Stair Barrier, please contact us. We are happy to help!
support@betteroptionsco.com | 1 (888) 752-8262 | betteroptionsco.com
Installation Instructions Wall to Banister
To Next Page
Need help?
General