To Next PageTo Next Page
Need help?Do you have a question about the The Swingset Pioneer and is the answer not in the manual?
General| Brand | The Swingset |
|---|---|
| Model | Pioneer |
| Category | Play Sets & Playground Equipment |
| Language | English |
Instructions for building the base A-frames for the fort structure using posts and crossbeams.
Attaching floor beams to the A-frames to form the foundational base of the fort.
Joining the two completed A-frames together to create the main structural support of the fort.
Adding diagonal braces between posts and crossbeams for enhanced structural stability.
Placing the wooden deck floors onto the fort frame, ensuring they rest on support bars.
Mounting the ladder and slide to the fort, and securing the top crossbeams.
Installing vertical boards and the final top crossbar to complete the fort's enclosure.
Permanently securing the deck floors using pocket holes and screws.
Installing the six side walls onto the fort structure, aligning edges with posts.
Instructions for attaching the separate 'Extension Beam Kit' accessory.
Instructions for attaching the 'Hammock' accessory using its specific kit.
Attaching four ground beams to the base posts for stability and ground contact.
Adding two diagonal beams for enhanced structural integrity and sway resistance.
Spreading and securing the tarp evenly over the top bars to create a roof.
Mounting the ship wheel, telescope, and flag as final decorative and functional elements.
