EasyManua.ls Logo

THE WORLD MODELS 30% Stearman PT-17 User Manual

THE WORLD MODELS 30% Stearman PT-17
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Warning! This model is not a toy.
It is designed for maximum performance. Please seek advice if one is not familiar with this kind
of engine powered precision model. Operating this model without prior preparation may cause
injuries. Remember, safety is the most important thing. Always keep this instruction manual at
hand for quick reference.
*Specifications are subject to change without notice.*
INSTRUCTION MANUAL
Wing Span
Wing Area
Flying Weight
Fuselage Length
116 in / 2950 mm
3700 sq in / 238.7 sq dm
38.5 Ib / 17.5 kg
88 in / 2240 mm
Specifications
FACTORY PRE-FABRICATED
ALMOST-READY-TO-FLY(ARF)SERIES
MADE IN CHINA
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
(
A300
)
Requires: 100 c.c. gasoline engine,
4-channel radio w/ 9 high torque servos.
A300PO30601412
Question and Answer IconNeed help?

Do you have a question about the THE WORLD MODELS 30% Stearman PT-17 and is the answer not in the manual?

THE WORLD MODELS 30% Stearman PT-17 Specifications

General IconGeneral
BrandTHE WORLD MODELS
Model30% Stearman PT-17
CategoryToy
LanguageEnglish

Summary

Introduction and Specifications

Model Identification and Requirements

Identifies the 30% Stearman PT-17 and its engine/radio needs.

Key Specifications

Lists wing span, area, flying weight, and fuselage length.

Initial Warning

Important safety notice regarding the model's precision nature.

Preparation and Safety Guidelines

Before You Begin

Instructions on reading the manual and checking all parts before assembly.

Safety Precautions and Symbols

Essential safety rules, symbols, and handling guidelines for the model.

Assembly Instructions

Parts List

Comprehensive inventory of all components included in the model kit.

Decals

Guidance on applying decals to the fuselage and wings.

Tail Piece

Instructions for attaching the tail piece.

Vertical Fin & Rudder

Steps for assembling the vertical fin and rudder.

Stabilizer & Elevator

Instructions for installing the stabilizer and elevator.

Tail Landing Gear

How to install the tail landing gear.

Flying Wire

Steps for attaching the flying wires.

Main Landing Gear

Guide for mounting the primary landing gear.

Fuel Tank

Instructions on installing the fuel tank.

Engine Mounting

Detailed steps for installing the engine.

Cowling

How to fit the engine cowling.

Servo Set and Servos Setting

Instructions for installing servos and setting them up.

Lower Wing

Steps for assembling the lower wing sections.

Upper Wing

Instructions for assembling the upper wing.

Wing Struts

How to attach the wing struts for stability.

Flying Wire Connections

Detailed steps for connecting the flying wires.

Canopy & Pilots

Installing the canopy and pilot figure.

Control Throws

How to set control surface throws for optimal flight.

Final Adjustments and Safety

Center of Gravity (C.G.)

How to measure and adjust the aircraft's center of gravity for flight.

Important Safety Precautions

Reinforces critical safety guidelines for flying the model.