Need help?Do you have a question about the Theatrelight Nova 24 and is the answer not in the manual?
General| Type | Lighting Console |
|---|---|
| Channels | 24 |
| DMX Channels | 512 |
| Control Protocol | DMX512 |
| Display | LCD |
| Power Supply | 100-240V AC, 50/60Hz |
Describes dual preset manual operation using Park key for dipless cross-fades.
Explains the process for recording lighting states, sequences, and performances into memory.
Describes how to playback recorded shows cue by cue using auto-fade.
Faders used for setting lighting levels for playback or recording.
Faders used to store and control playback of Scenes, Chases, or Shows.
Defines fade times for cross-fades and modifies chase fade times.
Emulates a two-preset desk using the Park key and Park Master fader.
How to set lighting levels on channel faders to create a scene.
Stores the current lighting state under the Park Master for playback.
Guides on transitioning between preset scenes using Masters.
How the Record key stores current desk output into spare memory.
Explains how Scenemasters store Scenes, Chases, or Shows.
Allows modification of permanent memory; Record LED must be on (Green).
Clears all recordings using a 4-digit code, for new show setup.
Protects recordings by disabling record and edit functions.
How to recall and play back recorded scenes using the Fade Master.
How to play back recorded chases and control their speed and direction.
To Next Page
