8. When iSCSI target volume has been created, the LUN ID is configurable from
1 to 254 with a default of the next available number in ascending numerical
order. The LUN ID is unique and can not be duplicated except for LUN ID 0.
9. If you’ve enabled CHAP authentication, enter a username and a password.
Confirm your chosen password be reentering it in the Password Confirm
box.
10. Click OK to create the iSCSI volume.
Modify iSCSI Volume
To Modify iSCSI volume on the current RAID volume, follow the steps below:
1. Under the Volume Allocation List, click Modify.
The Modify iSCSI Volume screen appears.
2. Modify your setting. Press ok to change.
To Next Page
Loading...
Need help?
General