15425 Chets Way | Armada, MI 48005
3
UNBOXING THE UV:
Upon unpacking, you will see that the UV bulb and quartz sleeve are packed separately for safe
transit. Please refer to pages 13 and 16 of this manual for instructions on how to install the bulb
and quartz sleeve. Quartz Sleeve O-Rings and End Cap O-Rings are packed in separate small bags
inside the box.
Composite mounting brackets are supplied and are located in the cardboard end tments.
CAUTION:
To reduce the risk of equipment damage or failure:
• DO NOT place the UltraUV Pro near ammable or other dangerous materials or objects.
• ALWAYS unplug the unit if there is no water running through it to prevent overheating.
• The UltraUV Pro is NOT submersible; do not place the UltraUV Pro where it might contact or
fall in the water.
• DO NOT operate during freezing conditions. Drain the UltraUV Pro and store in a
protected location.
• DO NOT operate the UltraUV Pro with a pump larger than the maximum ow rate indicated
by the unit specications. Operating with a pump larger than recommended can reduce the
UV’s eectiveness or cause damage to the UV and will NOT be covered under warranty.
• i. This appliance uses an ultraviolet (UV) source and must be used in compliance with its
markings and instructions to prevent the user’s eye and bare skin from exposure to harmful
UV radiation.
• ii. This appliance is provided with a door interlock/lock that disengages the UV source
when the door/cap is opened. This safeguard reduces the risk of personal injury from UV
overexposure.
• iii. When replacing lamps:
1. Unplug this device from the electrical outlet, and
2. replace only with the lamps for which the equipment is marked and intended.
• The UltraUV Pro is NOT suitable for use in swimming pools, swimming ponds, or other
situations where bodily contact is made with the water. Although the UltraUV Pro is designed
for outdoor use, it should never be submerged in water.
• Use between water temperatures of 40°F-104°F.
WARNING
GROUNDING INSTRUCTIONS – This appliance must be grounded. In the event of a malfunction or
breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance
for electric current. This appliance is equipped with a cord having an appliance-grounding
conductor and grounding plug. The plug must be plugged into an appropriate outlet that is
installed and grounded in accordance with all local codes and ordinances.
WARNING – Improper connection of the appliance-grounding conductor can result in a risk
of electric shock. Check with a qualied electrician or service representative if you are in doubt
whether the appliance is properly grounded. Do not modify the plug provided with the appliance;
if it will not t the outlet, have a proper outlet installed by a qualied technician.
This product meets the requirements of the Code of Federal Regulations (CFR) including Title 21,
Chapter 1, Subchapter J, Radiological Health.
To Next Page
