1. Align the attachment with the tip of the
arm and push to connect. To remove, grip
the attachment, placing 1 finger on each
side of the plastic connector.
2. Pull off the attachment.
Connecting the attachments
Using the Theragun mini
1. To turn on the Theragun mini, firmly press and hold the multi-functional
power/speed button on the right side of the device.
2. Float the device across areas in need of treatment, gradually applying light to
moderate pressure as needed.
3. Press the power/speed button again to toggle between 3 speeds.
4. To turn off the Theragun mini, firmly press and hold the power/speed button
until the device shuts off.
EN
To Next Page
Loading...
