THERAGUN PRO - Using the Theragun PRO; Device Operation Steps

EN
Using the Theragun PRO
1. Insert the lithium-ion battery fully before
turning on the Theragun PRO.
2. To turn on the Theragun PRO, rmly
press and hold the centre button on the
button pad.
3. Press the plus (+) and minus (-) buttons
on the button pad to increase or
decrease speed.
4. Press the left (<) and right (>) arrows on
the button pad to toggle between the
Theragun PRO’s pre-loaded treatment
presets.
5. To turn o the Theragun PRO, rmly
press and hold the centre button on the
button pad until the device shuts down.