TECHNICAL SPECIFICATIONS
* Optional accessory from Therm-ic
** available in retail locations or from Therm-ic
FIRST USE AND CHARGING OF THE S-PACK
BATTERY
Important note:
The S-Pack battery must be charged before using
them for the first time.
Preparing the USB wall plug universal charger (optio-
nal). Slide your country-specific adapter into the slot
on the back of the charger until it locks in with an
audible click.
USB cable charging process:
1. Plug the USB cable into the USB port. The charge
indicator (2.2) will light up green. Next, you plug the
charging connectors of the cable into the batteries
S-pack (2.4). Please check the illustration on the char-
ger to ensure proper orientation. The S-Pack battery
can be charged in any operating mode. The charging
process will start automatically and the charge indica-
tor (2.2) will light up in red during charging.
2. Once the S-Pack batteries are fully charged, the
charging process is automatically concluded and
USB wall plug
universal
charger* (incl.
contry-specific
adapters)
Input:
100V-240V ~
(50-60 Hz),
max. 300 mA
Output:
5V / 2000 mA
USB charging
cable **
Input:
5V
max. 2000 mA
Output:
4.2V / 2000 mA
Battery 700 Output: 3.7 V / 1400 mAh
Battery 1200 Output: 3.7V / 2400 mAh
Battery 1400 Output: 3.7V / 2800 mAh
9
To Next Page
