Need help?Do you have a question about the Thermaltronics TMT-9000S and is the answer not in the manual?
General| Brand | Thermaltronics |
|---|---|
| Model | TMT-9000S |
| Category | Power Tool |
| Language | English |
Details the construction and components of the desolder gun, including grip and trigger.
Describes the workstand's durable material, tip cartridge holder, and secure iron holder design.
Guide for selecting desolder tips by inner diameter and temperature series for optimal performance.
Guidance on selecting tip geometry, recommending an inner diameter larger than the lead diameter.
Explains selection of 60, 75, or 80 series tips based on application sensitivity and load requirements.
Step-by-step guide for assembling the desolder gun, connecting components, and initial operation.
Information that Thermaltronics systems do not require manual temperature calibration due to Curie Heat Technology.
Instructions for cleaning the desolder gun chamber, replacing the chamber liner and filter wool.
Guide on how to remove and replace the venturi using a slot type screwdriver for maintenance.
Steps to remove the desolder tip and gently pry out and install a new cartridge seal.
To Next Page