EasyManua.ls Logo

Thermasol PRO-575 - User Manual

Default Icon
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PRO Series Generator
OVER 60 YEARS OF STEAM SHOWER INNOVATION
Installation Operation Manual
thermasol.com/solutions
PRO-84, PRO-140, PRO-240, PRO-395, PRO-575, PRO-750, PRO-1000
Question and Answer IconNeed help?

Do you have a question about the Thermasol PRO-575 and is the answer not in the manual?

Summary

1 Important Information Before You Install

Health and Safety Precautions

Critical health and safety warnings for using the steam bath and installation.

3 Sizing or Double Checking the Unit Specified

4 Electrical Wiring

Electrical Wiring and Safety Guidelines

Overview of electrical code compliance, power source, wire type, breaker requirements, and electrician necessity.

5 Placing the Generator

6 Water Supply and Drain Pan

Water Supply Plumbing Guidelines

Instructions for connecting water supply using copper/brass, shut-off valves, and flushing.

7 Control Cable

Control Cable Handling Precautions

Critical precautions to avoid damaging the control cable during installation.

8 Steam Line and Steamhead

Steam Line Installation Rules

Guidelines for installing the steam line, including pipe type, unions, and directional flow.

Steamhead Location Requirements

Restrictions on steamhead placement near seating areas or controllers for safety and comfort.

9 Final Pre-Check Before Operation

Pre-Operation Checks

Procedure for turning on water supply, checking for leaks, and connecting power.

Power ON and Initial Test

Steps for powering on the generator and verifying control panel operation and initial heat-up.

Thermasol PRO-575 Specifications

General IconGeneral
BrandThermasol
ModelPRO-575
CategoryInverter
LanguageEnglish

Related product manuals