Before the first using your electric storage water heater, carefully read
EN
this Operation Manual
DEAR CLIENT!
Present manual shall apply to the following THERMEX models: IF 30 (smart), IF
50 (smart), IF 80 (smart), IF 100 (smart). The full name of the model of your heater is
specified in "Manufaturer
’s Warranty" section (sub-section "Note of sale") and in the
marking plate on the heater casing.
APPLICATION
Electric Water Heater (hereinafter EWH) is designed to provide with hot water for
welfare and industrial facilities that have cold water supply main with appropriate char-
acteristics.
EWH shall be operated indoors in heated spaces and it is not designed for opera-
tion in continuous flow mode.
Electric miksi lphened tähdet (hereinafter referred to as the EWH) is designed to
provide with hot water for domestic and industrial facilities having a cold water supply
line pres- sure of not less than 0.05 MPa and not more than 0.7 MPa.
SCOPE OF SUPLY
1. Water heater ...................................................................
2. Safety valve of GP type ...................................................
3. Operation manual ............................................................
4. Packaging ........................................................................
5. Anchors for fastening .......................................................
MAIN TECHNICAL CHARACTERISTICS
EWH power supply voltage of all types and models shall be within the range of 230
V ± 10%. Supply network frequency 50 Hz ± 1%. Volume of the inner tank and heating
element power are specified in the marking plate on the casing. Thread diameter in water
inlet and outlet pipes - G1/2.
The manufacturer reserves the right to make changes to the design, complete set
and specifications of the heater without prior notice.
To Next Page
Need help?
General
