Need help?Do you have a question about the THERMEx palermo vertical 810 and is the answer not in the manual?
General| Brand | THERMEx |
|---|---|
| Model | palermo vertical 810 |
| Category | Ventilation Hood |
| Language | English |
Connect the hood to the ventilation duct, power network, and install the wall hanger at the appropriate level.
Trace vertical line, position hood, drill holes, attach telescopic column, extend masking cover, install hanger, connect power.
Setting the air extractor mode where air is discharged to the outside via a special conduit.
Setting the odour absorber mode where filtered air returns to the room via top funnel cut outs.
Guidance on using low, medium, and top fan speeds based on fume concentration.
Essential safety instructions to be observed without exception during operation.
Explanation of the digital display and control buttons for hood operation.
Details on the automatic switch-off timer function with 10-minute intervals up to 90 minutes.
Instructions for cleaning and replacing metal grease filters.
Guidelines for using and replacing carbon filters when the hood is not vented.
Procedure for replacing the halogen lamps in the lighting system.
Key technical specifications including characteristics, voltage, power, and noise level.
To Next Page