Heat Pump Manual
COMMISSIONING
Tandem Installation Checks
On the master heat pump set
the cycle time to “10 minute test”
and after 10 minutes check that
the heat pumps duty cycle.
Fault the running heat pump and
check the other heat pump
starts and vis-a-versa
Finishing Off
Is the electrical box closed and
door secure
Are all panels secure
If the mesh was removed from
the side of the heat pump has it
been replaced
Are all tools and debris clear of
the site
Are there any site specific feature
that may hinder the operation of
the heat pump in the future
Notes
To Next Page
Loading...