EasyManua.ls Logo

Thermics CTOP2WF - Page 12

Thermics CTOP2WF
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Indicazioni led ricevitore
Led receiver indications
- Led vevő jelzések
4. Altre informazioni
Other info
- Más információ
Contatto finestra per forzare
lo spegnimento dell’unità.
Window contact for turning
OFF the unit.
Ablakérintkező az egység
KIkapcsolásához.
E’ possibile usare il contatto finestra previsto nella scheda elettronica per accendere/spegnere l’unità. Quando il
contatto sarà aperto, l’unità si fermerà dopo 30 secondi e ripartira solo quando il contatto verrà chiuso.
It is possible to use a window contact in main electronic board, for turning ON/OFF the unit remotely. If the contact
is opened, the unit will be turned OFF in the next 30 seconds and it stays OFF until the same contact will be closed.
Lehetőség van egy ablakérintkező használatára a fő elektronikai kártyában, az egység távoli BE/KI
kapcsolására. Ha az érintkezőt kinyitják, az egység a következő 30 másodpercben kikapcsol, és
mindaddig KI marad, amíg ugyanazt az érintkezőt be nem zárják.
RPEHFS e RPEHSM pannello
ad effetto radiante
RPEHFS e RPEHSM radiant
panel
RPEHFS és RPEHSM
sugárzó panel
Come accessorio per la serie FS and SM, è possibile usare il pannello ad effetto radiante.
Il pannello sarà sempre acceso in riscaldamento.
As accessory for the FS and SM series, it will be possible to use the radiant panel.
The panel will be always ON in case of heating mode.
Az FS és SM sorozat tartozékaként a sugárzó panel is használható
lesz. Fűtés üzemmódban a panel mindig BE lesz kapcsolva.

Related product manuals