J
Jessica StantonAug 10, 2025
How to troubleshoot a Thermo Pride AH2436E1 motor that won't start?
- RRobert BurtonAug 10, 2025
If the Thermo Pride Air Conditioner motor won’t start and shows no movement, begin by checking the power supply directly at the motor. Next, verify that the low voltage (24 VAC R to C) is present at the motor. Then, inspect the low voltage connections (G, PWM, W, R, C) at the motor and check for any unseated pins in the connectors on the motor harness. You can also test the motor by using a temporary jumper between R and G. Also, check the motor for a tight shaft and perform a motor/control replacement check. Finally, run a Moisture Check.