To Next PageTo Next Page
Need help?Do you have a question about the Thermo Products Spirit Series and is the answer not in the manual?
General| Brand | Thermo Products |
|---|---|
| Model | Spirit Series |
| Category | Furnace |
| Language | English |
Importance of adequate air supply for combustion and ventilation, and precautions regarding chemicals.
Details on fuel type, approved burners, heat output, and burner alignment within the combustion chamber.
Step-by-step guide for initial burner operation, including safety checks, pressure measurement, and flue gas analysis.
Checks and steps for when the furnace fails to operate, including power and thermostat checks.
Identifies issues when the burner short cycles on high limit thermostat but doesn't lock out.
Steps to diagnose why the furnace blower fails to start, checking voltage and components.
Instructions for locating, cleaning, or replacing air filters, emphasizing safety precautions before access.
Requirement for annual service by a qualified contractor, including inspection, cleaning, and nozzle/filter replacement.
Crucial safety warnings for cleaning, emphasizing fragility of the refractory material and annual inspection requirements.
Annual inspection of flue pipe, vent connector, chimney, and damper for signs of wear or damage.
Safety warnings for operation, steps to take in case of oil leaks, and procedures for operating and stopping the furnace.
Importance of adequate and clean air supply for safe and efficient operation, warning against blocking air supply.
