Need help?Do you have a question about the Thermo Scientific RadEye G20-ER10 and is the answer not in the manual?
General| Energy Range | 48 keV to 1.3 MeV |
|---|---|
| Display | LCD with backlight |
| Operating Temperature | -20°C to +50°C |
| Type | Portable Radiation Detector |
| Detector Type | Energy-compensated GM tube |
| Energy Dependence | ±30% (for 48 keV to 1.3 MeV) |
| Measurement Modes | Dose Rate |
| Units | µSv/h, mSv/h, µSv, mSv |
| Alarm Thresholds | Adjustable for dose rate and dose |
| Power Supply | 2 x AA batteries or rechargeable batteries |
| Battery Life | >2000 hours (alkaline batteries) |
Details the items included in the delivery package.
Step-by-step guide for battery installation and operation.
Procedure to power on the RadEye G20 unit and initial display.
Overview of navigating and using the instrument's menu functions.
Details the structure of the main menu and submenus for configuration.
Configuration of visual and audible alarm indicators (LED, sound, vibrator).
Describes the standard display and functions of the ratemeter mode.
Details how to enter and operate the scaler measurement mode.
Information about the two allocated alarm thresholds for dose rate and dose.
Guide on how to modify the alarm thresholds through the menu.
Describes how alarm devices (beeper, LED, vibrator) are activated.
Procedure to set the instrument's date and time.
Selecting battery type (rechargeable/alkaline) for accurate low battery warnings.
Starting and performing a source test to verify instrument performance.
Performing a simple test to check instrument functionality and indicators.
Explains various error messages and their meanings shown on the display.
Using a test adapter and check sources to verify radiation response.
Describes the low battery warning signals and behavior.
Warning messages related to calibration expiration or unset date/time.
Steps for installing the RadEye.EXE software from the CD ROM.
Configuring alarm settings for dose rate and dose.
Troubleshooting steps for when the instrument fails to power on.
Explains error messages appearing in the display's top line.
Troubleshooting connection issues when the software cannot find the RadEye.
Guidance on performing periodic source tests for maintenance.
Description of the test adapter for verifying instrument performance.
Technical specifications for RadEye G20-10 and G20-ER10 models.
To Next Page