Need help?Do you have a question about the Thermo Scientific RadEye G20-ER and is the answer not in the manual?
General| Alarm | Audible and Visual Alarms |
|---|---|
| Operating Temperature Range | -20°C to +50°C |
| Radiation Detected | Gamma |
| Dose Rate Range | 0.01 µSv/h to 100 mSv/h |
| Display | LCD |
| Detector Type | Energy Compensated GM Tube |
Instructions on how to insert AAA batteries into the instrument.
Procedure to power on the RadEye G20 instrument.
Explanation of how to navigate and use the instrument's menu functions.
Overview of the instrument's menu layout and options.
How to select the unit for dose rate and scaler measurements.
How to select between ratemeter and scaler measurement modes.
Configuration of parameters for scaler measurements.
Configuration options like Autosend, Battery type, Time/Date, and Language.
How to enable or disable LED, sound, and vibrator alarms.
Displays the actual dose rate and how to access accumulated dose and max/mean values.
How to use the instrument in scaler mode for counting events.
Information about dose rate and dose alarm thresholds.
Procedure to modify alarm threshold values via the menu.
How to use single pulse indication and finder mode for audio feedback.
Description of LED, sound, and vibrator alerts for different alarm levels.
How to lock and unlock the instrument's keypad.
Procedure to set the instrument's internal clock.
Selecting the correct battery type for accurate low battery warnings.
Configuration options for the Bluetooth communication cover.
Steps to conduct a source test for instrument verification.
Basic procedure to perform a simple functional check of the instrument.
Instructions for installing the RadEye PC software.
Overview of protecting the RadEye configuration with a password.
Setting units, history interval, acoustic indication, and other general parameters.
Steps to resolve issues when the instrument fails to power on.
Technical specifications for specific RadEye models.
Technical specifications for RadEye G20 and G20-ER models.
To Next Page