Need help?Do you have a question about the Thermo Scientific Savant SpeedVac DNA120 and is the answer not in the manual?
General| Model | DNA120 |
|---|---|
| Temperature Range | Ambient to 80°C |
| Type | Vacuum Concentrator |
| Vacuum | Oil-free vacuum system |
| Applications | DNA/RNA concentration, Sample drying |
| Capacity | Up to 120 Microtubes |
| Power Supply | 230V, 50/60Hz |
| Power Requirements | 230V, 50/60Hz |
Inspect the shipping carton for damage upon receipt; refuse delivery if damaged.
Carefully remove the instrument and verify contents against the packing list for discrepancies.
Inspect the unit for shipping damage, report to carrier, and save carton.
Install the system on a stable surface near a compatible electrical outlet and connect power.
Description of the front panel controls including mode, timer, setting, and drying rate switches.
Select between MANUAL and AUTO modes for starting and stopping concentrator runs and timer functions.
Set run timers and heater timers using the control panel switches for desired drying duration.
Step-by-step guide for initiating, running, and monitoring a manual concentration run.
Step-by-step guide for initiating, running, and monitoring an automatic concentration run.
Select the drying rate (LOW, MEDIUM, HIGH) to control chamber temperature and accelerate evaporation.
Section to record Model Number, Serial Number, and Date Purchased for future reference.
Provides contact details for Sales Division, Laboratory Parts and Service, and Technical Support.
To Next Page