Need help?Do you have a question about the Thermo Scientific Safe 2020 and is the answer not in the manual?
General| Brand | Thermo Scientific |
|---|---|
| Model | Safe 2020 |
| Category | Laboratory Equipment |
| Language | English |
Covers safety features of Safe/Maxisafe 2020 series, emphasizing operator training and procedures.
Explains the protective and alarm systems ensuring personal and material protection, including airflow and warning systems.
Details the HEPA filter system for downflow and exhaust air, including inlet air protection.
Describes the pilot switch and operating panel, their functions, and status indicators.
Guides the user through the initial operational checks and assembly for the safety cabinet.
Provides step-by-step instructions for assembling the stand and mounting the safety cabinet.
Explains how to safely connect the device to the power supply, including voltage checks and grounding.
Emphasizes the necessity of the installation test before operation and its role in safety warranty.
Details the display components, value displays, keys, and function/status indicators on the control panel.
Lists error codes (ER 1-ER 5) and their potential causes, advising contact with technical service.
Outlines the various operating modes (OFF, Work, Standby, UV) and their specific functions and indicators.
Describes the device control software and how basic functions are managed via the operating panel.
Details the procedures for moving the front window to the working position and stopping its movement.
Explains how to monitor the downflow velocity of the airstream in the sample chamber.
Explains how to call up and interpret the Performance Factor (PER) indicating the safety state.
Covers the basic functions controlled by the pilot switch, including device on/off and window movement.
Outlines the steps for preparing the sample chamber, including installing accessories and waiting for airflow stabilization.
Advises on how to respond to failure messages (ER 1-ER 5) and initial troubleshooting steps.
Describes the steps to temporarily interrupt work, including removing samples and cleaning.
Details the procedure for long-term shutdown, requiring complete decontamination and sterilization.
Presents various decontamination methods based on agent risk and required purity.
Covers UV disinfection as an additional step after wipe/spray, using integral or mobile UV lamps.
Outlines the formaldehyde sterilization method, its requirements, and risks, mandating trained personnel.
To Next Page