Need help?Do you have a question about the Thermo Scientific Sorvall ST 16R and is the answer not in the manual?
General| Maximum Speed | 16, 000 RPM |
|---|---|
| Weight | 90 kg |
| Refrigeration | Yes |
| Power Requirements | 230V, 50/60Hz |
| Temperature Range | -10° to +40°C |
| Capacity | 4 x 100 mL |
| Noise Level | 58 dB |
| Timer | Up to 99 hr 59 min, continuous |
Outlines essential safety measures to prevent accidents during operation.
Details general safety regulations and precautions for operating the centrifuge safely.
Steps to check the centrifuge and packaging for damage before initial setup.
Instructions for connecting the centrifuge to the electrical power supply safely.
Steps to power on the centrifuge and its initial self-check process.
Instructions on how to safely open the centrifuge lid.
Procedures for properly closing and securing the centrifuge lid.
Detailed steps for installing a rotor into the centrifuge using the AutoLock system.
Guide to setting centrifuge parameters like speed, time, temperature, and curves.
Steps and procedures for starting and running a centrifugation cycle.
Step-by-step guide for safely removing a rotor from the centrifuge.
Procedures for disinfecting the centrifuge in case of spills of infectious material.
Procedure for manually opening the lid in case of power failure or malfunction.
A table listing common error messages and their possible causes and solutions.
To Next Page