High Speed 2D Barcode Reader | 2 - 1
Thermo Scientific
Chapter 2
2
Installation
The recommended operating system to use the Thermo Scientific VisionMate High Speed 2D
Reader is Microsoft Windows XP. The minimum requirements for a personal computer running
the VisionMate software at a satisfactory level are listed below: If performance is noticeably slow,
increasing RAM to 1GB or above and / or increasing processor speed will normally help.
1. Insert the CD and start the installation.
• If the installation does not start automatically, double-click the setup application on the root of
the CD. “VisionMate96 3.2.1.7 Setup.exe” Newer version may also be supplied
2. Confirm that you agree to the terms in the license agreement by selecting “Yes” to continue with
the installation.
Installation Requirements
Installing the VisionMate Software
Component Requirement
Computer/Processor 2 GHz 32-bit (x86) or 64-bit (x64) or higher processor
Memory 1 GB RAM
Hard disk 300 MB of available hard disk space
Operating System Microsoft Windows 2000, Windows XP or Windows Vista Windows 7
Drive CD-ROM drive
Display Super VGA (800x600) or higher resolution monitor with 256 colors
Peripherals Mouse or compatible pointing device
USB
One available USB2.0 port
Note: The scanner should not be connected via an external USB hub!
Power One mains power socket
To Next Page
Loading...