Need help?Do you have a question about the ThermoFisher Scientific Vanquish VC-D11 and is the answer not in the manual?
General| Brand | Thermo Fisher Scientific |
|---|---|
| Product Name | Vanquish VC-D11 |
| Resolution | 1 ppm |
| Power Supply | 24 VDC |
| Operating Humidity | 0 to 90% RH (non-condensing) |
| Output | 4-20 mA |
Explains safety symbols and signal words used in the manual and on the device.
Defines the intended use of the device and the Vanquish system.
Covers general safety information, personnel qualifications, and protective equipment.
Highlights essential safety measures related to the device's electrical components.
Addresses potential hazards from hazardous substances and biohazards.
Describes the leak detection system and how it alerts users to leaks.
Provides crucial safety guidelines to follow during the device installation process.
Outlines the steps for installing the device as part of the Vanquish system.
Specifies the important requirements for the installation site to ensure optimal performance.
Details guidelines for using the correct power cords and electrical safety precautions.
Explains the device connectors and how to connect them to the system.
Details the steps for connecting the device's power cord to the power source.
Guides through the process of installing a flow cell into the detector.
Provides rules and recommendations for setting up flow connections safely and correctly.
Provides guidelines for proper connection of the flow cell and its parts.
Details the steps required to turn on the device's power.
Explains how to set up the device within the chromatography software.
Highlights essential safety guidelines to be observed when operating the device.
Provides essential safety guidelines to follow during maintenance and service procedures.
Guides through wavelength validation using a holmium-oxide filter and calibration.
Provides steps to locate and resolve liquid leaks detected by the sensor.
To Next Page
