Need help?Do you have a question about the ThermoFisher Scientific Vanquish VC-D50 and is the answer not in the manual?
General| Brand | ThermoFisher Scientific |
|---|---|
| Model | Vanquish VC-D50 |
| Category | Security Sensors |
| Language | English |
Describes the manual's scope, features, and operating principle.
Explains conventions used for safety messages, notices, and typographical elements.
Lists additional hardware and software documentation for reference.
Defines safety symbols, signal words, and guidelines for observing manual safety notices.
Specifies the intended use of the device and laboratory practices.
Details general safety information, personnel qualifications, and protective measures.
Provides guidelines on solvent compatibility, pH ranges, and concentrations.
Lists the main features of the fluorescence detector, including light source and detection capabilities.
Explains the optical detection principle of fluorescence detectors.
Identifies user-accessible components located behind the device's front doors.
Describes the flow cell design, its label, and identification chip.
Provides instructions for unpacking the device, including handling safety.
Lists the items included in the device delivery package.
Outlines critical safety guidelines to follow during device installation.
Details the steps for setting up and installing the device in the Vanquish system.
Specifies essential requirements for the installation site, including power.
Describes how to set up the hardware and connect devices and cables.
Provides rules and recommendations for setting up flow connections.
Provides procedures to determine pressure within the flow cell and its components.
Provides steps for turning on the device and its power control.
Guides on setting up the device within the chromatography software.
Highlights safety guidelines to be observed during device operation.
Describes the device's control elements: keypad and status indicators.
Covers steps required to prepare the device for operation and sample analysis.
Provides guidelines for handling, operating, and storing flow cells.
Lists and describes the five operational modes of the detector.
Lists and describes key parameters for routine operation.
Provides information and hints to optimize detector performance.
Provides instructions for shutting down the device for temporary or long-term periods.
Lists safety guidelines crucial for performing maintenance and service.
Provides general rules and recommendations for successful maintenance procedures.
Details routine and preventive maintenance tasks for optimal performance.
Guides on performing wavelength calibration using water (Raman measurement).
Covers cleaning and replacement of flow cells, with handling guidelines.
Provides instructions for replacing the main power fuses, emphasizing safety.
Explains how to update the device firmware using the Chromeleon software.
Covers preparation, transport, and shipping procedures for the device.
Details procedures for removing, returning, and installing slide-in modules.
Introduces features and information to help identify and resolve problems.
Lists observed messages and provides troubleshooting assistance for each.
Provides an overview of possible operating issues and their remedial actions.
Details the performance specifications of the detector, including optical design and wavelength ranges.
Lists the physical specifications of the device, including dimensions and weight.
Provides general information on authorized parts and their compatibility.
Lists the items included in the standard ship kit for the device.
Describes optional accessories available for flow cells and other functionalities.
Lists consumables and replacement parts, including capillaries, cables, and fuses.
Details declarations of conformity, CE, cTUVus, and RoHS compliance.
Explains UV cutoff wavelengths and their effect on mobile phase composition.
Describes the digital I/O ports for exchanging signals with external devices.
To Next Page
