Need help?Do you have a question about the ThermoFLUX Pelling 25 and is the answer not in the manual?
Covers manual introduction, safe operation, reading, technical changes, and copyright information.
Details correct boiler usage, permissible fuels, and recommended wood pellet specifications.
Explains various warning and safety symbols used throughout the manual for hazard identification.
Covers other risks (like CO), user's duty to be informed, and the boiler's safety devices.
Outlines the necessary conditions and checks before putting the boiler into operation.
Guidance on the correct installation and standards for chimney and flue gas pipes.
Specifies required minimum clearances from the boiler to walls and surrounding objects.
Provides a general overview of the boiler and lists accompanying materials.
Detailed schematic view of the Pelling pellet boiler, identifying its main components.
Details the boiler's control panel buttons, display elements, and their basic functions.
Explains the step-by-step process of the boiler's operation from ignition to working mode.
Covers adjustments for Clock, Chrono, Language, Stand-By, Buzzer, Filler, Status, Technical settings, and Fuel Type.
Step-by-step guide on how to start the boiler's ignition sequence using the control panel.
Instructions on how to properly shut down the boiler and initiate the cleaning cycle.
Guide on how to set and adjust the boiler's working power level from 1 to 5.
Instructions on how to adjust the boiler's water temperature within the factory-set range.
Explains the boiler's modulation process where power is reduced near the set temperature.
Details the automatic cleaning cycle for the fire-pot and how it is displayed.
Information on burning wood in the Pelling boiler, including fuel requirements and precautions.
Procedure for daily cleaning of the braizer basket (burning pot) based on pellet quality.
Tasks for weekly cleaning, including cleaning the ash pot and heat exchanger tubes.
Procedure for monthly cleaning of the flue chamber, involving unscrewing nuts and removing plates.
Diagrams illustrating various hydraulic connection schemes for the boiler system.
Wiring diagram showing the electric connections for the Pelling boilers, including components and power supply.
Lists common alarms, their descriptions, and recommended solutions or service actions.
Guidance on proper disposal of boiler components and electronic parts, emphasizing recycling and special waste sites.
Specifies the guarantee duration for different boiler components (body, electric parts).
Outlines the conditions for warranty coverage, including first start-up, installation, and fuel quality.
Lists conditions and damages that are not covered by the boiler's guarantee.
General| Nominal heat output | 25 kW |
|---|---|
| Fuel | Wood pellets |
| Hopper capacity | 45 kg |
| Maximum working pressure | 3 bar |
| Minimum return temperature | 55°C |
| Power supply | 230V / 50Hz |
| Electrical power consumption (operation) | 80 W |
| Flue gas temperature | 120°C |
| Flue gas connection diameter | 80 mm |
To Next Page
