To Next PageTo Next Page
Need help?Do you have a question about the Thermolec ACU-STEAM and is the answer not in the manual?
General| Brand | Thermolec |
|---|---|
| Model | ACU-STEAM |
| Category | Humidifier |
| Language | English |
Instructions on how to restart the humidifier to resolve minor malfunctions or error codes.
Steps to take if a water leak is detected, including shutting off the supply.
Provides a reference table to identify error codes and their causes.
Guidance on when and how to contact a service company for complex problems.
Emphasizes safety precautions, like powering off, before inspecting the unit.
Guidance on cleaning scale from tank components, emphasizing what to clean and what not to use.
Explains the importance of proper duct location for diffuser and hose installation for optimal performance.
Procedure for attaching one end of the steam hose to the steam diffuser using a hose clamp.
Instructions on how to correctly insert and fasten the steam diffuser into the air duct.
Steps for connecting the other end of the steam hose to the water tank's steam outlet.
Details the installation requirements for the rigid drain pipe, siphon, and ensuring proper air gaps.
Emphasizes the importance of installing the unit level for proper operation of water level sensors.
Instructions for marking and installing screws for mounting the humidifier on a vertical surface.
Guidance on selecting the optimal location for the humidifier based on steam hose length and clearances.
Steps for connecting the water supply tube to the unit, including water hammer absorber fitting.
Details on cutting and inserting drain tubes into the rigid pipe, ensuring minimum length for siphon function.
Instructions for connecting the plastic tube to the overflow pan connector.
Instructions for checking the water supply path for any leaks at the fittings after pressurization.
Specifies the need for a dedicated breaker in the main panel for the humidifier's power supply.
Ensures that wire size and protection equipment meet electrical code requirements.
Instructs to follow the provided wiring diagram for all external electrical connections.
Details on connecting the fan control dry contact to start the furnace fan during operation.
Explains how to adjust DIP switches to configure automatic tank flush intervals based on water hardness.
Instructs to turn the breaker ON and confirms the unit is ready with the green light.
