EasyManua.ls Logo

Thermoplan BLACK&WHITE ONE BWone-CTM User Manual

Thermoplan BLACK&WHITE ONE BWone-CTM
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
© 2013 Thermoplan AG, subject to change
805.451_EN_REV-B
Initial start-up BWone-CTM
Initial start-up
Follow these steps to prepare the machine for
daily operation.
1.
5.
3. 6.
4.
!
Push the POD to the top
Remove grounds drawer
Remove milk container and clean
it thoroughly.
Fill milk container und put it into
the refrigerator.
Guide suction tube into milk container
and close the refrigerator.
The machine demands a cold start rinse
Press rinse key on display
After the rinse, the machine will
heat up
Fill the bean hoppers left and right
with fresh coffee beans.
The machine is now ready for daily use.
Double product key
Cancel key
Grinder change key
Cleaning key (daily cleaning)
Do not use unpasteurised milk! Only use heat treated (e.g. pasteurised or
ultra heat treated) milk. Only use milk with a sell-by date that has not yet
expired. Only pour milk that has already been cooled down (below 5°C)
into the milk container.
Once the milk has been opened, use it up within 24 hours to
prevent health hazards.
Remove grounds drawer
Fill milk
Initial start-up nished
Cold start rinse
Fill bean hopper with coffee beans
Description function keys
2.
Press red main switch
Reinsert grounds drawer
Starting up the machine
main switch BWone without POD
main switch BWone with POD
Recommendation
Fill the bean hopper with only the daily amount of
beans you really need so that the aroma is preserved.
Question and Answer IconNeed help?

Do you have a question about the Thermoplan BLACK&WHITE ONE BWone-CTM and is the answer not in the manual?

Thermoplan BLACK&WHITE ONE BWone-CTM Specifications

General IconGeneral
BrandThermoplan
ModelBLACK&WHITE ONE BWone-CTM
CategoryCoffee Maker
LanguageEnglish

Summary

Initial Start-up Procedure

Prepare Grounds Drawer

Steps to push the POD to the top and remove the grounds drawer.

Machine Startup

Steps to press the red main switch and reinsert the grounds drawer.

Cold Start Rinse

Performing the cold start rinse as demanded by the machine.

Fill Bean Hoppers

Instructions to fill both bean hoppers with fresh coffee beans.

Fill Milk System

Steps to clean, fill the milk container, and guide the suction tube.

Initial Start-up Finished

Confirmation that the machine is ready for daily use after initial setup.

Function Key Descriptions

Explanation of various function keys like double product and cancel.

Bean Aroma Recommendation

Tip to use only daily amounts of beans to preserve aroma.

Daily Cleaning Procedure

Preparation for Cleaning

Using coffee and milk cleaning tablets for the circulation systems.

Starting the Cleaning Cycle

Pressing the cleaning key to initiate the automated cleaning process.

Cleaning Process Monitoring

Observing the cleaning progress and duration on the display.

Completing Manual Cleaning

Following display messages to finish cleaning and check instructions.

Additional Daily Cleaning Tasks

Cleaning the drip tray and milk outlet as part of daily maintenance.

Weekly Bean Hopper Cleaning

Removing and cleaning the bean hopper on a weekly basis.

Related product manuals