What to do if the label stock jams during printing on ThermoTex Barcode Reader?
If the label stock jams during printing with your ThermoTex Barcode Reader, clear the paper jam. Remove any label material left on the thermal print head and clean the print head using a soft lint-free cloth dipped in alcohol.
Why is the printed image blurred on my ThermoTex TT5-L?
If the printed image is blurred on your ThermoTex Barcode Reader, check the darkness setting and inspect the thermal print head for dust or dirt.
What to do if the label stock passes through ThermoTex Barcode Reader but no image is printed?
If the label stock passes through your ThermoTex Barcode Reader but no image is printed, ensure the label stock is loaded right side up and is suitable material. Also, choose the correct printer driver, label stock, and a suitable printing mode.
Why is there no printed image on some parts of the label from ThermoTex TT5-L Barcode Reader?
If there is no printed image on some parts of the label when using your ThermoTex Barcode Reader, check for any label material or ribbon stuck to the thermal print head. Also, check for errors in the application software, ensure the starting position is set correctly, inspect the ribbon for wrinkles, and verify the power supply.
How to fix skipping labels during printing on ThermoTex Barcode Reader?
If your ThermoTex Barcode Reader is skipping labels during printing, check the label height setting, and ensure the sensor is free of dust. You may also need to run the auto-detection function.
Why is the printed image positioned incorrectly by ThermoTex TT5-L?
If the printed image is positioned incorrectly when using your ThermoTex Barcode Reader, check for paper or dust covering the sensor and verify that the label stock is suitable. Check the paper guide settings.
What to do if there is no printed image or the image is blurred on the ThermoTex TT5-L Barcode Reader?
If there is no printed image on part of the label or the image is blurred when using your ThermoTex Barcode Reader, check the thermal print head for dust or other dirt. Use the internal â~Tâ command to check whether the thermal print head will carry out a complete print job. Check the quality of the print medium.
What to do if the LCD screen displays error alert and printing is interrupted on ThermoTex Barcode Reader?
If the LCD screen displays an error alert and printing is interrupted on your ThermoTex Barcode Reader, check the software settings (driver settings) or command codes. Look for the error alert in the table in Section 6.8. Error Alerts. Check whether the print mechanism is closed correctly.
How to fix the LCD screen if it does not light up on ThermoTex Barcode Reader?
If the printer is switched on but the LCD screen does not light up on your ThermoTex Barcode Reader, check the power supply.
What to do when labels are not fed through or cut off incorrectly on ThermoTex TT5-L Barcode Reader?
If, when using the cutter on your ThermoTex Barcode Reader, the labels are not fed through or cut off incorrectly, check whether the cutter has been correctly installed and ensure the paper guides are functioning correctly.
Details the printer's technical specifications and capabilities, including print method, resolution, and dimensions.
Lists the safety and regulatory standards the printer complies with, such as EN and CE certifications.
Provides information on recycling and proper disposal of electronic components and batteries.
Crucial guidelines for safe daily use of the printer, focusing on power and environmental conditions.
Essential safety protocols for handling printer maintenance, emphasizing qualified personnel.
Highlights important warnings and precautions regarding battery replacement and modifications.
Illustrates and labels the printer's front panel components like buttons and touch panel.
Identifies and labels the various ports and connectors on the printer's back.
Shows the underside of the printer, including access to module connection jacks.
Depicts the printer's interior components and their layout, including label sensors.
Details the mechanical components responsible for the printing process, like the print head.
Step-by-step guide on how to open the printer cover for access to internal components.
Instructions for correctly assembling and installing a new ribbon module into the printer.
Guide on how to load the label stock onto the supply hubs and through the guides.
Procedures for connecting the printer to a computer via power, USB, or serial interfaces.
Steps for installing the necessary software drivers for the printer on a computer.
Describes the function of the printer's physical buttons and touch panel for control.
Overview of the printer's LCD screen layout, touch gestures, and functional modes.
Details various setting options and functions accessible via the LCD, including main and device pages.
Explains how to use an external USB keyboard for printer operation and menu navigation.
Procedures for calibrating the printer to media and running self-tests for functionality checks.
Describes using the physical button for auto-sensing and calibrating the label's parameters.
Lists common error messages, beeps, and their potential causes and solutions.
Provides information on printer status indicators and alerts displayed on the operation panel.
Details connectivity and usage of USB devices like memory sticks, keyboards, scanners, and firmware updates.
Instructions on how to activate dump mode for diagnostic purposes and sending commands.
Steps required before installing optional printer accessories, including power removal.
Step-by-step guide for installing the optional cutter accessory to the printer.
Instructions for installing the label roll module accessory, including passing labels through.
Guide on how to properly clean the printer's critical print head using a soft lint-free cloth.
Lists common problems encountered with the printer and provides corresponding solutions.
Technical details and pinouts for the printer's USB, Serial, Ethernet, and Parallel ports.
Steps to pair and configure an external Bluetooth keyboard with the printer.
Guide for establishing a Bluetooth connection using the printer's LCD panel and menu.
Explains the various Bluetooth settings like SSP, Profile, PIN Code, and their functions.
General| Brand | ThermoTex |
|---|---|
| Model | TT5-L |
| Category | Barcode Reader |
| Language | English |
To Next Page