Do you have a question about the Thetford C262-CWE and is the answer not in the manual?
Remove waste tank and check space for toilet.
Draw toilet outline and position templates on wall.
Drill wall holes and mark fastening strip positions.
Cut service door panel and verify space availability.
Position wall templates and draw outlines accurately.
Apply protective tape and drill wall hole for door panel.
Connect the toilet wiring, following system type precautions.
Remove waste tank and check space for toilet.
Draw toilet outline and position templates on wall.
Drill wall holes and mark fastening strip positions.
Cut service door panel and verify space availability.
Position wall templates and draw outlines accurately.
Apply protective tape and drill wall hole for door panel.
Connect the toilet wiring, following system type precautions.
| Type | Cassette toilet |
|---|---|
| Level Indicator Waste Tank | Yes |
| Level Indicator Flush Water Tank | Yes |
| Removable Cassette | Yes |
| Battery Operated | Yes |
| Flush System | Electric |
| Toilet Seat Rotation | 180 degrees |
| Water Supply | Manual |
Loading...