To Next PageTo Next Page
Need help?Do you have a question about the Thetford N614E.3F and is the answer not in the manual?
General| Freezer Compartment | Yes |
|---|---|
| Adjustable Thermostat | Yes |
| Type | Absorption |
| Energy Source | Gas/12V/230V |
| Freezer Volume | 15 L |
| Refrigerant | NH3 |
Stores fresh/frozen foods and makes ice.
Operates within 3° side-to-side and 6° front-to-back tilt limits.
Performance unaffected during travel; LP gas mode disabled when moving.
Cool for 8 hours before loading food for optimal performance.
Located at bottom of fresh food compartment for fruit and vegetable freshness.
Door bins can be repositioned within the fresh food compartment for user convenience.
Keeps pre-frozen food frozen; not for quick freezing.
Door latch prevents opening during travel; storage latch for extended storage.
Monitors temperature for overheating protection; requires service technician to check trigger status.
Control display panel located between freezer and fresh food doors.
Press and hold On/Off switch for 1 second to power on; indicators will illuminate.
Hold confirmation button for 2s, then use selector switches to choose mode.
Optional LP gas operation for up to 7 days using AA batteries for the control panel.
Hold confirmation button for 2s, then use selector switches to set desired cooling level.
Prevents condensation on control panel; can be turned off to save power.
Improves performance above 38°C ambient. Thermostat controls fan when switch is on.
Steps for igniting LP gas operation: open tank, select mode, set cooling, listen for spark.
Ensure 230VAC power, select AC mode, and set cooling level for AC startup.
Ensure 12VDC power, select DC mode, and set cooling level for DC startup.
Press and hold the on/off button for 2 seconds to turn off all LEDs.
Not for initial cooling; use AC/LP first. Operate on DC only when vehicle engine is running.
LP gas operation at >1700m may cause reduced cooling or burner issues.
Not designed for freezing temps; exposure to 32°F or lower may disrupt operation.
Instructions for removing, cleaning, and reinstalling the drip tray.
Describes the correct appearance of the LP gas flame for optimal operation.
Procedure for removing and cleaning the burner orifice, requires professional service.
Diagram illustrating the electrical connections and components of the refrigerator.
Visual guide showing the layout and connection points of refrigerator wiring.
