To Next PageTo Next PageWhat to do if Thetford Sani-Con Turbo 700 pump operates, but no liquid is expelled?
If your Thetford Toilets pump operates but doesn't expel any liquid, first check to see if the holding tanks are empty. Next, ensure that the RV gate valves are fully open. Lastly, the pump itself may be clogged.
Why won't the motor run on my Thetford Sani-Con Turbo 700 Toilets?
If your Thetford Toilets pump isn't running, ensure the pump is switched on and that your RV battery is adequately charged. Also, verify that the circuit breaker or fuse is working correctly, and that the pump is receiving the correct voltage. Finally, check whether a foreign object is preventing the impeller from turning.
What to do if the waste discharge pressure stops on Thetford Sani-Con Turbo 700 Toilets?
If the waste discharge pressure of your Thetford Toilets stops or decreases dramatically, start by checking if the holding tanks are empty. With the pump activated, inspect the hose for any points of significant expansion, which may indicate a blockage. Turn off the pump and manually inspect the hose for obstructions by feeling for variations in its width. Also, examine the pump through the clear access cap for any obstructions in the impeller. Keep in mind that the presence of fluid may hinder visual inspection. Failure to clear a clog could cause damage to the pump, which will void the warranty.
General| Power Supply | 12V DC |
|---|---|
| Battery Operated | No |
| Material | Plastic |
| Inlet Size | 3 inches |
| Outlet Size | 1 inch |
| Flush Mechanism | Electric |
| Color | Black |
General introduction to the SANICON® Turbo system.
Important safety precautions and warnings for system use.
Contact information for customer assistance.
Details on how hose size and length affect pump performance.
Step-by-step guide to connecting the hose to the pump station.
Procedure for emptying the black water tank using the system.
Explanation of the pump's thermal cut-off safety feature.
Diagram and labels for the SANICON® Turbo system components.
Procedure for emptying gray water tanks.
Steps for properly storing the discharge hose.
Guide to removing blockages from the pump system.
Procedure for preparing the system for winter storage.
Details on warranty terms and where to find them.
Solutions for problems with waste discharge pressure.
Troubleshooting steps when the pump runs but no liquid is expelled.
Checks to perform when the pump motor does not operate.
Reasons and solutions for the pump shutting off unexpectedly.
Instructions on how to disassemble the pump to check for blockages.
Steps for using the optional manual over-ride feature.
List and descriptions of available service kits.
