MK3 MINIGRILL (OZ TO EURO CONVERT)
INSTRUCTIONS
FOR
CONVERTING AUSTRALIAN APPLIANCE
TO EUROPEAN STANDARD
MODEL:- MK3 MINIGRILL DUAL FUEL
IMPORTANT
SPINFLO LTD UNDERTAKE STRINGENT IN-HOUSE TESTS BEFORE ANY
APPLIANCE IS DESPATCHED, ANY SUBSEQUENT CHANGE TO THE
OPERATING SPECIFICATION MUST BE UNDERTAKEN BY A COMPETENT
PERSON, USING GENUINE SPINFLO PARTS, OTHERWISE THE APPLIANCE
WILL NOT MEET THE APPROPRIATE STANDARDS TO WHICH IT IS APPROVED.
FAILURE TO COMPLY WILL VOID ANY WARRANTIES OR GUARANTEES, EITHER
STATED OR IMPLIED, AND SPINFLO LTD WILL NOT BE RESPONSIBLE FOR ANY
SUBSEQUENT PROBLEMS RELATING TO THE APPLIANCE OR GAS CONTROL
CIRCUIT, FOLLOWING ANY SUCH FAILURE TO COMPLY.
• IT IS LAW THAT ALL GAS APPLIANCES BE INSTALLED/SERVICED BY AN
AUTHORIZED GAS TECHNICIAN WHO WILL WORK TO SAFE AND
SATISFACTORY STANDARDS.
• BEFORE ANY SERVICE WORK IS STARTED THE APPLIANCE SHOULD HAVE
BEEN LEFT TO COOL AND WHERE APPROPRIATE DISCONNECTED AT THE
MAINS SOCKET.
• USE ONLY GENUINE SPINFLO PARTS.
• ON COMPLETION THE APPLIANCE MUST BE CHECKED FOR GAS
SOUNDNESS
THESE INSTRUCTIONS ARE SPECIFIC TO THE Mk3 MINIGRILL DUAL FUEL
WITH MODEL NUMBERS WITHIN THE RANGE S~HG73xxxZ
To Next Page
General