Need help?Do you have a question about the Thevco TC5-8SDA and is the answer not in the manual?
General| Control Mode | PID, On/Off |
|---|---|
| Operating Temperature | 0-50°C |
| Mounting | Panel mount |
| Input Type | Thermocouple (Type K, J, R, S, B, E, T), RTD (PT100) |
| Output | Relay, SSR, 4-20mA |
| Display | LED |
| Power Supply | 50/60Hz |
Explains the meaning of various indicator lights on the controller.
Guidance on physically attaching the controller enclosure to a wall.
Procedures for wiring the controller to power and system components.
Describes how to detect and troubleshoot faulty temperature probes.
Explains how to navigate the display and change parameter values.
Method to prevent accidental modification of controller parameters.
How to adjust the target room temperature.
How to configure timer settings for Stage 1 fans.
Setting the temperature difference for Stage 1 fan operation.
How heaters operate sequentially based on temperature.
Configuring independent heating zones with separate probes.
Setting temperature offsets for heater turn-off points.
Setting temperature differences for heater activation/deactivation.
Setting low, high, and critical temperature alarm offsets.
To Next Page
