THIEL CS2.3 SPECIFICATIONS
Bandwidth (-3 dB)
Amplitude response
Phase response
Sensitivity
Impedance
Recommended Power
Size (W x D x H)
Weight
Driver Complement:
Woofer
8" (6.4" radiating area) with anodized aluminum cone, cast frame, 1.7" dia.
voice coil. Underhung coil (short coil/ long gap) motor system. Linear travel
0.4" pk-pk, 13 in
3
linear displacement. 2.5 lb. magnet, 6 lb. total magnet
structure. Copper pole sleeve, copper magnet ring. Made by THIEL.
Midrange
4.5" (2.7" radiating area) with anodized aluminum diaphragm, cast frame, 1"
dia. voice coil. Underhung coil (short coil/long gap) motor system. Linear
travel
1
/8" pk-pk. Magnet weight of .8 lb. powers midrange and tweeter.
Copper pole sleeve. Ferrofluid. Made by THIEL.
Tweeter
1" (1.2" radiating area) with anodized aluminum dome. Powered by
midrange motor. Coincident with midrange.
35 Hz - 23 kHz
37 Hz - 20 KHz ±2 dB
minimum ±5°
87 dB @ 2.8 v-1m
4Ω, 3Ω minimum
100-400 watts
11 x 15 x 41.5 inches
70 lb
Supplemental
Technical Information
for model
THIEL CS2.3
Coherent Source
®
Loudspeaker
This paper contains only information specific to the CS2.3 speaker system.
It is intended to supplement the general technical information paper which
explains our engineering philosophy, goals and techniques.
4/98
To Next Page
Need help?
General
