ThinkGizmos TG23 - User Manual

Questions and Answers

Z
zharveyAug 4, 2025
Why is my ThinkGizmos Washer making abnormal noise and vibrating?
- B
  Brandon WeaverAug 4, 2025
  Abnormal noise and vibration in your ThinkGizmos Washer can be caused by several factors: * Unbalanced clothes in the spin dry tub. Make sure clothes are pushed down and level with the spin cap. * Loose items like hairpins, coins, or metal objects left in the clothes. Check for and remove any such items. * Overfilled wash or spin tub. Remove some items to reduce the load. * Something jammed between the pulsator and the wash tub. Remove any jammed objects.
D
donald79Aug 11, 2025
What to do if the ThinkGizmos TG23 Washer tub doesn't drain?
- S
  sandersonAug 11, 2025
  If the spin or wash tub of your ThinkGizmos Washer isn't draining, consider these possibilities: * An object may have fallen into the space between the spin tub and spin-dry basket. Remove the object. * The drain hose might be blocked. Inspect the hose and clear any blockages. * The drain location may be too high. This machine drains by gravity, so either move the machine above the drain area or acquire a small home pump.
J
jameschaseAug 27, 2025
What to do if the spin-dry basket on my ThinkGizmos TG23 does not rotate?
- J
  John RivasAug 27, 2025
  If the spin-dry basket on your ThinkGizmos Washer isn't rotating, check these potential causes: * The spin select switch might have a loose contact. Adjust the contactor of the switch. * The fixed screw of the spin-dry basket or shaft coupling might be loose. Tighten the screw. * The shaft of the spin-dry basket might be tangled by textiles. Remove the textile. * The brake dragline might be loose. Tighten the dragline.
J
Joseph TuckerSep 10, 2025
How to fix a slow pulsator on my ThinkGizmos Washer?
- C
  Courtney GreerSep 12, 2025
  A slow pulsator on your ThinkGizmos Washer can be due to: * A power issue. Switch the power on. * An incorrectly attached transmission belt. Assemble the transmission belt correctly. * A loose belt pulley. Tighten the belt. * A blockage in the pulsator. Remove the blockage.