EN
MAINTENANCE AND CLEANING
DISPOSAL
• How to Clean the Soda Maker
1. Wipe the head of the machine with a wet cloth and, if necessary, with mild
detergent. Do not use any corrosive detergent.
2. Use water (not warmer than 45°C ) to wash the bottle regularly.
3. If not using the bottle for a certain period, keep the cap off to keep the
interior thoroughly dry. The ambient temperature for bottle storage must be
not higher than 40°C.
4. It is suggested to wash the bottle interior with clean water and to dry it up
completely after each use.
• Considerations
1. When making sparkling water, avour ingredients can be added to the
water. However, the bottle should be rinsed with water after nishing the
operation before being thoroughly dried in order to avoid corrosion, safety
risks, or the tube being stuck because of ingredients remaining in the bottle.
2. Do not use avour ingredients that have large particles or are very sticky.
Very sticky liquids will produce foam when mixed with CO
2
, spilling out along
with the gas when pressure is released.
3. When the CO
2
pressure in the bottle reaches 0.78MPa (the maximum
pressure in the bottle), a pressure relief protection will be triggered - you
will hear the sound of excess CO
2
releasing, meaning some gas is spilling
out. When this occurs, stop pressing the Carbonating button or CO
2
will be
wasted.
4. If you do not hear the sound, there may not be enough gas in the cylinder -
change to a new cylinder.
5. Using ice water will produce tastier drinks. We suggest chilling your water
before adding it to the bottle.
The packaging materials of this product are recyclable - please send them to
your local recycling centre. Should you want to dispose of the product, please
contact your local dealer and do not treat it as normal waste.
• Please check the soda Maker and its accessories (carbon dioxide cylinder,
bottle, etc.) upon opening the box. If any parts are damaged or defective,
please contact our customer service.
• Do not use the product and related accessories if damages and defects
have not been repaired.
• Do not change or repair products and accessories by yourself. Maintenance
can only be done by an authorised representative.
• Only use the original accessories provided or recommended by the
manufacturer.
PRECAUTIONS
10
To Next Page
Loading...