User Manual of TI120 Series Variable Frequency Drive
Safety Precautions
Safety Statement
Please read carefully and observe the safety precautions when installing, operating and
maintaining the product.
To ensure personal and equipment safety, when installing, operating and maintaining the product,
please follow all safety precautions indicated on the product and the manual.
The "precautions" and "danger" items in the manual do not represent all safety items that should
be followed, but only supplement all safety precautions.
This product shall be used in an environment that meets the design specification requirements,
otherwise it may cause faults, and functional abnormalities or component damage caused by
failure to comply with relevant regulations are not within the scope of product quality assurance.
Our company will not bear any legal liability for personal safety accidents and property losses
caused by violation operation of the products.
Definition of Safety Level
"Danger" means death or serious personal injury if you do not follow the regulations.
"Notice" means that if you do not follow the regulations, it may cause minor physical injury or
equipment damage.
Safety Precautions
■ Before installation
Do not touch control terminals, single board components and variable frequency drive
components with your hands directly!
Please do not use the variable frequency drive with missing or damaged components;
otherwise there is a risk of failure expansion and personal injury!
Whether the rated value of the product nameplate is consistent with your order
requirements, if not, please do not install it!
Please do not install when the packing list is not consistent with the actual object.
To Next Page