Third Reality 3RSB015BZ

Need help?

Do you have a question about the Third Reality 3RSB015BZ and is the answer not in the manual?

Summary

LED Status

LED Status Descriptions

Details LED behavior for pairing, offline, and low power states.

Button Using

On Blind Body

Illustrates buttons on the main blind unit for control.

On Blind Remote

Illustrates buttons on the remote control for blind operation.

Setting Smart Blind

Installation

Guidance for mounting the smart blind inside or on the surface of windows.

Pairing Instructions

Echo Device Pairing

Steps to pair the smart blind with compatible Amazon Echo devices.

Mounting the Blind

Procedure to attach the blind unit onto the installed extension brackets.

Adjusting Blind Height

How to set the top (0%) and bottom (100%) positions of the blind.

Using Smart Blind

Voice Control

Commands to operate the smart blind using voice assistants like Alexa.

App Control

Managing blind functions through a mobile application interface.

Button Control

Operating the blind using physical buttons on the unit and remote.

Troubleshooting

Fail to pair with Echo

Solutions for issues when the smart blind cannot connect with Echo devices.

Smart Blind not responding

Steps to resolve cases where the smart blind fails to operate.

FCC Compliance and Warranty

FCC Regulatory Conformance

Information regarding compliance with FCC rules and regulations.

RF Exposure

Details on the equipment's compliance with radiation exposure limits.

Limited Warranty

Information on product warranty and customer support contact details.

This document describes the Smart Blind, a Zigbee-enabled device designed to integrate seamlessly with compatible Amazon Echo devices.

Function Description

The Smart Blind is a motorized window covering that offers automated control over light and privacy. It operates as a standard Zigbee device, allowing direct connection with Echo devices that have a built-in Zigbee hub, such as the Echo (4th Gen), Echo Plus (1st and 2nd Gen), Echo Show 10 (2nd and 3rd Gen), and Echo Studio. This direct compatibility means users can control the blinds using voice commands via Alexa or through the Alexa app without needing an additional hub.

The primary function of the Smart Blind is to open and close automatically or on demand. It supports various control methods, including voice commands, app control, and physical buttons on the blind body and a dedicated remote. Users can issue commands like "Alexa, turn on my first blind," "Alexa, turn off my first blind," or "Alexa, set my first blind to 50 percent" for precise control. Through the Alexa app, users can set timers, schedules, and routines to automate the blind's operation based on sunset/sunrise times or other preferences. Group control is also available, allowing multiple blinds to be managed simultaneously.

The Smart Blind features a bottom drive design, which facilitates easier battery replacement and convenient operation. A bottom sensor is integrated for simple and accurate setting of the blind's lowest position. The blind's construction includes an aluminum coating on the inner side, which provides thermal insulation and sound absorption, enhancing privacy and room darkening. This makes it suitable for various indoor settings, including bedrooms, living rooms, and patio sliding doors. Its cordless design ensures safety for children and pets.

Usage Features

Installation: The Smart Blind can be installed using either inside mounting or surface mounting techniques.

Inside Mounting: If the window sill width is less than 1.2 inches, surface mounting is recommended. For inside mounting, users need to measure and mark positions, then drill holes. Plastic expansion bolts are inserted into the holes, and extension brackets are fastened with screws.
Surface Mounting: Similar to inside mounting, this involves measuring, marking, drilling, inserting expansion bolts, and fastening extension brackets. If the user wants to expose the whole window when the blind is open, the distance from the holes to the window should be greater than 4.3 inches.

Battery Installation: The Smart Blind is powered by AA batteries. To install them, a screw needs to be unscrewed to open the battery cover. Four AA batteries are then inserted, and the cover is reinstalled and screwed shut. The device is designed for long battery life, offering more than 6 months of operation.

Pairing with Echo Devices: Before pairing, users should ensure their compatible Echo devices are set up and updated to the latest software version.

Press and hold the "Set" button on the Smart Blind body for more than 5 seconds until the LED status changes. Release the button, and the LED will flash rapidly after 10 seconds, indicating it's in pairing mode.
Say "Alexa, discover my devices." Alexa will then automatically find the Smart Blind.

Positioning and Adjustment: After pairing, the Smart Blind is positioned on the extension brackets. One side of the blind's top is inserted into the brackets, then the blind is pushed until "Clicks" are heard, and transparent buttons on the brackets pop up, indicating secure installation. Users should shake the blind to ensure it's in close contact with the extension bracket and that the buttons face indoors to receive remote control signals.

To adjust the curtain height:

Press the "Up" button on the blind body to set the top position (0%).
Press the "Down" button; the Smart Blind will automatically find and stop at the bottom position (100%) when the bottom sensor is triggered.

Control Methods:

Voice Control: Use Alexa commands for on/off, percentage adjustment, and other operations.
App Control: Manage the blind through the Alexa app, including setting timers, schedules, routines, and group controls.
Button Control: Physical buttons on the blind body and the included blind remote allow for direct control.

Maintenance Features

Battery Replacement: The Smart Blind uses readily available AA batteries, which are inexpensive and easy to change. The bottom drive design simplifies the battery replacement process.

Factory Reset: If troubleshooting is needed or to reset the device, a factory reset can be performed. Press and hold the "Set" button on the Smart Blind body for more than 5 seconds until the LED status changes. Release the button, and the LED will flash rapidly after 10 seconds, indicating it's in pairing mode. This process can help resolve pairing issues or other malfunctions.

Troubleshooting Pairing Issues:

Compatibility and Updates: Ensure the Echo speaker is compatible with the Smart Blind and updated to the latest version.
Echo Device Setup: Verify that Echo devices are set up correctly before adding the Smart Blind.
Reboot Echo Speaker: Unplug and replug the Echo speaker to reboot it, then attempt pairing again.
Factory Reset Echo Speaker: If issues persist, perform a factory reset on the Echo speaker by pressing and holding the Action button for 25 seconds. Wait for the light ring to cycle through colors, then attempt pairing.
Syncing Blind: If the Smart Blind is unresponsive, turn it on/off twice in the Alexa app to sync it.
Reboot and Reset: If connection issues persist, reboot the Echo speaker and factory reset the Smart Blind, then try pairing again.
Deregister and Register Echo Speaker: As a last resort, deregister and then re-register the Echo speaker, then attempt to pair the Smart Blind.

The Smart Blind is designed for user-friendly operation and maintenance, with clear instructions for installation, pairing, and troubleshooting to ensure a smooth experience.