thomann Harley Benton DNAfx GiT Pro - Expression Pedal Operation

6.4 Expression pedal
The unit has a native Expression Pedal ( ‘PEDAL1’ ) and supports an external pedal ( ‘PEDAL2’ )
using a 1/4" TRS jack cable (stereo). The LED [1] lights up blue when the native pedal is ena‐
bled. The LED [2] lights up blue when the external pedal is connected.
You need to calibrate the Expression Pedal before using it for the rst time (see Ä ‘ ‘PEDAL
CALIBRATE’ ’ on page 50).
The ‘EXP’ function allows to control multiple parameters in dierent ranges through
dierent toe-down/heel-down positions.
The Expression Pedals can only adjust parameters, but not enable or disable eect
modules.
Operating
multi eects unit
40