The device offers 200 patches to choose from. You can change the patch parameters (incl.
those of SENSE, CURVE, EFX) and save them.
You can save settings by pushing the [DIAL/ENTER] control for about 3 seconds.
The current patch number flashes in the display along with the middle and right dot. Then
press the [DIAL/ENTER] control again to save the current selection. The patch number stops
flashing.
You can cancel the saving process any time by pressing any other buttons (except
[DIAL/ENTER]). The pad is then in the mode of the pressed button.
Storing a patch
The functions of the device
Synth Drum
23
To Next Page
Loading...
