Need help?Do you have a question about the thomann millenium and is the answer not in the manual?
Overview of symbols and signal words (DANGER, CAUTION, NOTICE) used in the manual.
Details the correct and intended usage of the device as per the user manual.
Advises on potential hearing damage from high volume levels and recommends volume reduction.
Specifies indoor use and protection from liquid, moisture, sunlight, and strong vibrations.
Ensures safe connection of power supply, voltage check, and precautions during storms/disuse.
Diagram and initial descriptions of front panel controls like drumhead and buttons.
Details the drumhead and hoop as the primary striking surfaces for sound generation.
Explains rim knobs for extra sounds and the rotary control for adjusting headphone output volume.
Describes the DIAL/ENTER rotary control with pressure switch for parameter adjustments and saving.
Details the LOOP and PLAY buttons for mode selection and loop playback control.
Explains the function of PATCH and EFX buttons for activating respective modes and selections.
Describes the LED display's role in showing modes and parameters of selected menus.
Details the 1/4" headphone output and 1/8" Aux input sockets for audio connections.
Explains the DC 9V power socket and the POWER button for turning the unit on and off.
Guides on how to power on the device and set the initial overall volume level.
Step-by-step instructions for selecting a patch using the DIAL/ENTER control.
Instructions for selecting built-in loops, adjusting their volume, and navigating modes.
Details on using the PLAY button to start/stop loop playback and notes on potential sound delay.
Guides on activating effect mode and selecting one of the five available global effect types.
Instructions on how to adjust pad sensitivity in sense mode using the DIAL/ENTER control.
Guides on selecting touch velocity dynamics via curves in curve mode using the DIAL/ENTER control.
Instructions for saving modified patch parameters, including sense, curve, and effect settings.
Step-by-step guide on how to reset the device to its original factory default settings.
Illustrates playing the synth drum using drumsticks, hot rods, or bare hands.
Explains using the drumhead's pressure sensor to activate and control touch-sensitive sound effects.
Instructions for fine-tuning pad sensitivity by adjusting a bottom-side screw with an Allen wrench.
Diagram showing the necessary parts and layout for drumhead replacement.
Detailed instructions for opening the unit, replacing the drumhead, and reassembling securely.
Instructions on how to clean accessible parts using dry or slightly damp cloths, avoiding harsh cleaners.
Guidance on eco-friendly disposal of packaging materials and the old electronic device.
To Next Page
General