You can select the touch velocity dynamic of the pad in the curve mode. To activate the curve
mode press the buttons [PATCH] and [EFX] simultaneously.
There are 9 possible curves to choose from, the LED display shows accordingly: . is
preset as default standard value.
A parameter change in the curve mode also affects the drumhead and hoop area: (see
Ä
‘Possible settings for the touch velocity dynamic’ on page 22).
1. Turn the [DIAL/ENTER] knob to select a suitable touch velocity dynamic.
ð
The LED display shows the current parameter for the touch velocity dynamic, e.g.
2. Now push on the [DIAL/ENTER] knob to confirm this curve selection.
ð
You will now notice a changed dynamic when striking the drumhead or rim.
3. Press the [PATCH]button to exit the curve mode.
Adjusting touch velocity
dynamic
The functions of the device
Synth Drum
21
To Next Page
Loading...
Need help?
General